Orthopedic devices to increase penis size have been used by men for more than a decade and have been proven to have positive effects. The most widely used device is called an expander, which is translated from English as an expander or buffer. This fully reflects its purpose. It is characterized by simplicity in design and assembly, allowing men to use both purchased (factory) extenders and homemade extenders. It's quite easy to do. The main thing is to have the necessary materials and basic knowledge of the mechanism of operation of the intimate apparatus.
Types and effects of extenders
The device works on the principle of proliferation of the corpus cavernosum. This occurs under conditions of uniform tension of the tissues due to periodic extension of the axes in the direction of increasing length. The growth of new tissues does not stop; Cells divide under the continuous action of dispersive forces.
The average growth rate, according to reviews from users and manufacturers, is an increase in length of 2-5 cm over a period of 6 to 10 months. You should not expect immediate results. It will take patience and regular use of the extender. Violation of this recommendation will lead to failure to achieve the desired effect.
Depending on the mounting method, extenders are divided into several types. When planning to assemble a home version, you need to understand how they differ from each other.
Vacuum expander
Perimeter is made using a special vacuum chamber. It covers the head of the penis with a circumference of about 3-7 cm. It is considered the most reliable and safe. The risk of injury is practically reduced to zero because there is no risk of compression.
Penis enlargement device
Ring and strap extender
The fastening mechanism is almost the same, but the shape of the fastener is different. In the first case, a loop is used, and in the second case, a strap is used. The difference gives these species a significant difference.
The strap is lined with gauze so compression is minimal. On the contrary, the ring can strongly compress the head, disrupting the blood supply to the reproductive organs, but remains the most popular choice.
How to make an extender with your own hands at home?
You can craft any of the three types of equipment listed. The most difficult type to make will be the vacuum type since you will have to make a chamber. Otherwise, the process will not make any significant difference.
Blueprint
Draw the principle diagram of the device yourself. To make a drawing, it is enough to study the design of any famous manufacturer. Based on a photo, drawing, video, they sketch their sketch. The length of the side posts is chosen based on the desired result. It can vary from 20 to 25 cm.
Necessary materials and tools
Homemade extenders are assembled from the same parts as home extenders. The specific material depends on the type of structure being assembled:
- Stop rings, straps and loops come into direct contact with the skin and do not cause allergic reactions. This imposes certain requirements on the material. The ring can be made from thick cardboard, hypoallergenic plastic/resin, without sharp corners. Its internal diameter should be 2-3 mm larger than the cross-sectional width of the penis. It is best to use a sterile dressing before use and change it each time.
- The bars (side bars) are selected so that the required length can be fixed for a long time. These can be molds, bars, or chrome spokes.
- The vacuum chamber and bulb must be sealed. If this condition is not met, then such a homemade product will not work.
The difference between the devices lies in the fastening part. If you decide to make a variety with a camera, you should not give preference to plastic bottles, as some sources write, but buy a special jar. These are sold in pharmacies. This ensures the creation of an internal vacuum.
Homemade expansion diagram
Step-by-step assembly instructions
The production of a strap or ring device involves performing the following sequence of work:
- A piece with a diameter of 11 cm is cut from a piece of plywood or other material no more than 10 mm thick. A hole with a circumference of at least 5. 5 cm is made inside. Other dimensions are determined by its cross-section. penis.
- The length of the bars is 20-30 cm. They are screwed completely into the plywood, leaving a little on top. The entrance places are covered with glue.
- They screwed a "sheep" into each one.
- Strips are cut out of a thin metal sheet and holes are made in it.
- A clip made of a flexible tube or strap, which can be used as a wide medical tourniquet, is inserted into the holes.
- Check the reliability of fixation.
The assembly of the vacuum type differs only in that a jar has a pear attached to the end. Not everyone has such a device at home, but it is sold for free in pharmacies in the city. Radius ranges from 13 to 25 mm. It is selected according to the size of the reproductive organs. The tightness of the clamp is guaranteed by a rubber sleeve. Its length must be at least 6 cm. It can be made from elastic surgical gloves.
The air will be pumped out using a light bulb or a flexible hose connector. You can use tonometer element. The shut-off valve is removed from it and inserted from the other end. This allows you to change the principle of operation. The pear will begin to pump out instead of pumping out air. As you can see, you will have to tinker a lot more than with a strap and loop device.
To help you understand the principle of assembling an extender with your own hands at home, a video will help you clearly understand how the elements are connected to each other, as well as what material they are made of.
Penis extender - tied below the knee
How and when should I use it?
Indications for use of the device are its small size (10-12 cm). This length is not a "reference" length. A man decides for himself whether he is satisfied with his reproductive organs or if he wants to have more. To increase penis size, you need to wear a homemade or factory-made device for at least 4-6 hours a day. The design allows you to hide the extender under clothing. People around you won't notice anything.
Instructions for using the stretcher:
- The circle is placed on the slightly erect penis. The ring should fit snugly against the pubic bone.
- The foreskin is retracted and a camera, ring or strap is secured to the glans. It is necessary to ensure that blood flow is not interrupted (no excessive pressure, change in color of the integument).
- Adjust the length of the bar. There should be no pain. This parameter is gradually increased, allowing the organ to get used to the level of stress, that is, the penis is trained.
When possible, massage your penis every hour. This allows him to quickly adapt to the load. After the specified period of time, the device is removed and the meat is kneaded with special creams for private areas. The device is thoroughly sterilized each time and placed in clean packaging for storage.
Advantages and disadvantages of homemade structures
The advantages of a stretcher at home include the following parameters:
- opportunity to try stretchers without purchasing equipment;
- Relatively cheap;
- get a design that fully corresponds to the parameters of the penis.
There is actually very little advantage. There are more disadvantages. These include the inconvenience of the product, since it is quite difficult to independently assemble a model that ideally screws, puts on, takes off and does not press anywhere and does not slip off.
Which extender is better - factory or homemade?
To answer this question, it is enough to compare two types of models:
- A homemade product is much heavier than factory models. This leads to having to adjust the rods for a long time each time so that they do not press on the head of the penis. Another point is that making a vacuum model is quite difficult. By the way, it is often less effective than homemade ones with rings and straps.
- Cost, considered an advantage, is a relative advantage. Today there are Chinese models, costing 1-3 thousand rubles. This is no more expensive than a homemade extender. No one will sell half a meter of hairpins or 20 cm of textolite. You will have to buy a lot of extra materials to keep it from working. This makes assembling the device with your own hands profitable only when you already have everything you need.
- The simple design of the self-assembling device is not an advantage but a disadvantage because it will be inconvenient to use. It takes a long time to put it on and take it off, and taking into account that self-massage is recommended periodically, it is less effective.
One conclusion can be drawn - factory equipment is better. To try this method of penis enlargement, you just need to buy an inexpensive model
What risks can occur when using homemade equipment?
Experts and experts do not recommend assembling the extender yourself without the appropriate skills. If the device appears "clumsy", presses, presses, or causes discomfort, you should absolutely not wear it. This can lead to unpleasant consequences.
Homemade extender
A well-assembled device will not be inferior in efficiency to the factory device. It will just be less aesthetically appealing. Otherwise there would be no difference, but here there is also a nuance. Many users write that with prolonged use, hematomas, compresses and irritation form on the dermis.
This may be caused by low quality materials. Finding medical silicone at a pharmacy is almost impossible. If one is sold, its properties will not be as desired, and with prolonged exposure, negative consequences will begin to appear.